| .. |
|
modules/xibalba
|
Created armor and weapons sprite sheets for Xibalba. Created system with Tiers(materials) on Y-axis and Types on X-axis. (ex. body slots) Also, created spell sprite sheet with system of Elements on Y and types (cone, bolt, ball, lode and combinations) on X.
|
2014-03-05 00:18:34 -08:00 |
|
resources
|
Fixed elements rendering twice in state_menu. Added a moving background to state_menu for movement testing.
|
2014-02-26 18:43:05 -08:00 |
|
sdl
|
Added some (pretty bad) module loading code. At the moment modules/module_name/CONF is loaded (if not, it bails) into g_module_conf and the list of sprites and default scale is acquired. From this, g_module_spritesheets is malloced for (spritesheet count) * sizeof(struct Spritesheet*) and Spritesheets are created and loaded into their respective positions. NOTE: Spritesheets should be set up by the renderer in part - probably via function pointer, similar to Elements. After these are loaded, ../modules/module_name/module_name.tsd is attempted to be loaded as well. Not much error checking done yet, so eggshells abound. Module CONF error checking will probably be handled by some function when we first generate the list of modules in modules/ dir. ALSO, Spritesheet loading does not check sprites/CONF for width, height and columns - this will be fixed on next commit.
|
2014-03-12 03:46:46 -07:00 |
|
states
|
Added some (pretty bad) module loading code. At the moment modules/module_name/CONF is loaded (if not, it bails) into g_module_conf and the list of sprites and default scale is acquired. From this, g_module_spritesheets is malloced for (spritesheet count) * sizeof(struct Spritesheet*) and Spritesheets are created and loaded into their respective positions. NOTE: Spritesheets should be set up by the renderer in part - probably via function pointer, similar to Elements. After these are loaded, ../modules/module_name/module_name.tsd is attempted to be loaded as well. Not much error checking done yet, so eggshells abound. Module CONF error checking will probably be handled by some function when we first generate the list of modules in modules/ dir. ALSO, Spritesheet loading does not check sprites/CONF for width, height and columns - this will be fixed on next commit.
|
2014-03-12 03:46:46 -07:00 |
|
ui
|
Added a load module state that provides a button list of modules found in the ../modules directory. When clicking on one, it will attempt to load ../modules/MODULE_NAME/MODULE_NAME.tsd into struct Data* g_tile_data. If it succeeds, it switches to a test state where I will be tweaking stuff like tile movement and similar. I will also add spritesheet loading in the load module state.
|
2014-03-11 23:56:23 -07:00 |
|
Makefile
|
Added a load module state that provides a button list of modules found in the ../modules directory. When clicking on one, it will attempt to load ../modules/MODULE_NAME/MODULE_NAME.tsd into struct Data* g_tile_data. If it succeeds, it switches to a test state where I will be tweaking stuff like tile movement and similar. I will also add spritesheet loading in the load module state.
|
2014-03-11 23:56:23 -07:00 |
|
c_extra.c
|
Added rendering code for sprite and fonts, made a pretty bad high precision timer - while being higher precision than SDL_GetTicks, it has a few problems that I must sort out. Also need to make it crossplatform.
|
2014-02-25 02:45:10 -08:00 |
|
c_extra.h
|
Added rendering code for sprite and fonts, made a pretty bad high precision timer - while being higher precision than SDL_GetTicks, it has a few problems that I must sort out. Also need to make it crossplatform.
|
2014-02-25 02:45:10 -08:00 |
|
fio.c
|
Added the linked list struct, LList, along with two functions for initializing and freeing a single LList. Also added the fio.c/.h files that will contain all functions pertaining to more complicated file or directory access. At the moment it provides two functions: dirToLList, which populates a linked list with the contents of the directory (as explained in the source), and fileExists, a simple function that checks if the file exists.
|
2014-03-03 22:48:00 -08:00 |
|
fio.h
|
Added the linked list struct, LList, along with two functions for initializing and freeing a single LList. Also added the fio.c/.h files that will contain all functions pertaining to more complicated file or directory access. At the moment it provides two functions: dirToLList, which populates a linked list with the contents of the directory (as explained in the source), and fileExists, a simple function that checks if the file exists.
|
2014-03-03 22:48:00 -08:00 |
|
globals.h
|
Added some (pretty bad) module loading code. At the moment modules/module_name/CONF is loaded (if not, it bails) into g_module_conf and the list of sprites and default scale is acquired. From this, g_module_spritesheets is malloced for (spritesheet count) * sizeof(struct Spritesheet*) and Spritesheets are created and loaded into their respective positions. NOTE: Spritesheets should be set up by the renderer in part - probably via function pointer, similar to Elements. After these are loaded, ../modules/module_name/module_name.tsd is attempted to be loaded as well. Not much error checking done yet, so eggshells abound. Module CONF error checking will probably be handled by some function when we first generate the list of modules in modules/ dir. ALSO, Spritesheet loading does not check sprites/CONF for width, height and columns - this will be fixed on next commit.
|
2014-03-12 03:46:46 -07:00 |
|
interfaces.h
|
Lots of stuff added since last commit. ASCII-based Font system and Element system(similar to tile_editor)s now partially in place. State management now more flushed out, but still likely to be tweaked. Now sports two renderers - software-mode SDL and hardware-accelerated OpenGL mode. At the moment code is not in place to switch between the two renderers in-program (managed by a call to interfaceSetRenderer), but it will be added later with the appropriate freeing of surfaces and textures. A more generalized binary to .c/.h program was added to the new tools subdirectory - it takes a binary file as an argument and creates the appropriate .c/.h files. It also can handle the append flag, -a.
|
2014-02-22 00:20:44 -08:00 |
|
llist.c
|
Added vm.c/.h in test. Implemented a good portion of the bytecode execution system. Need to implement non int data type operations. The VM is coming together\!
|
2014-03-06 23:54:19 -08:00 |
|
llist.h
|
Added the linked list struct, LList, along with two functions for initializing and freeing a single LList. Also added the fio.c/.h files that will contain all functions pertaining to more complicated file or directory access. At the moment it provides two functions: dirToLList, which populates a linked list with the contents of the directory (as explained in the source), and fileExists, a simple function that checks if the file exists.
|
2014-03-03 22:48:00 -08:00 |
|
main.c
|
Added some (pretty bad) module loading code. At the moment modules/module_name/CONF is loaded (if not, it bails) into g_module_conf and the list of sprites and default scale is acquired. From this, g_module_spritesheets is malloced for (spritesheet count) * sizeof(struct Spritesheet*) and Spritesheets are created and loaded into their respective positions. NOTE: Spritesheets should be set up by the renderer in part - probably via function pointer, similar to Elements. After these are loaded, ../modules/module_name/module_name.tsd is attempted to be loaded as well. Not much error checking done yet, so eggshells abound. Module CONF error checking will probably be handled by some function when we first generate the list of modules in modules/ dir. ALSO, Spritesheet loading does not check sprites/CONF for width, height and columns - this will be fixed on next commit.
|
2014-03-12 03:46:46 -07:00 |
|
settings.tsc
|
Added the linked list struct, LList, along with two functions for initializing and freeing a single LList. Also added the fio.c/.h files that will contain all functions pertaining to more complicated file or directory access. At the moment it provides two functions: dirToLList, which populates a linked list with the contents of the directory (as explained in the source), and fileExists, a simple function that checks if the file exists.
|
2014-03-03 22:48:00 -08:00 |
|
state_menu.c
|
More stuff added - how nondescript. In particular, data.c/.h now includes a function for loading in a .tsc, or timesynk configuration file, into a Table. This adheres to the information regarding the timesynk Configuration Syntax on the wiki. This feature has been implemented in the engine, as video width, height, and other similar options are loaded from the settings.tsc file relative to the engine. Also added a modules directory with a basic skeleton for the Xibalba module.
|
2014-03-02 22:10:49 -08:00 |
|
state_menu.h
|
More stuff added - how nondescript. In particular, data.c/.h now includes a function for loading in a .tsc, or timesynk configuration file, into a Table. This adheres to the information regarding the timesynk Configuration Syntax on the wiki. This feature has been implemented in the engine, as video width, height, and other similar options are loaded from the settings.tsc file relative to the engine. Also added a modules directory with a basic skeleton for the Xibalba module.
|
2014-03-02 22:10:49 -08:00 |
|
ts_event.h
|
Added vm.c/.h in test. Implemented a good portion of the bytecode execution system. Need to implement non int data type operations. The VM is coming together\!
|
2014-03-06 23:54:19 -08:00 |
b33b2a534c